-
www.Airrex.com
Your most reliable source for top quality pneumatic tools, parts, service and experience
www.JackHammers.com www.JackHammers.net www.Rockdrill.com
Search suggestions - click me!
Search term suggestions:×
- Check spelling (we don't use spellcheck)
- Use tool type, brand, model, part number, etc.
- Avoid filler words (a, the, for, verbs, etc.)
- Call us if you have a question (see Contact page)
- Example: "Airrex 6588 rockdrill"
Paving Breaker Points/Chisels/Steel
| The following tools are manufactured of high quality carbon steel, forged and properly heat-treated to provide maximum toughness and edge retention. They are designed to be used for concrete, stone and asphalt cutting applications. They are NOT designed to cut steel. To minimize unnecessary wear on hammers, be sure to use sharp tools only! | ||
|
WARNING: Use in Demolition Hammers ONLY! DO NOT use as hand chisels! CAUTION: Always use safety equipment when working with these tools! |
|
| Paving Breaker Bits | ||||
| Longer Lengths Available for Most Tools - Call: 800‐241‐9669 | ||||
| Tool: | Under Collar Length (inch): | Details: |  Part Number: |
 Part Number: |
 Asphalt Cutter |
11" | 5" Wide Blade | 118-AC | 125-AC |
 Bushing Tool |
8" | 16 Teeth | 118-BT | 125-BT |
 Clay Spade |
16" | 5-1/2" Wide Blade | 118-CS | 125-CS |
 Digging Chisel |
16" | 3" Wide Blade | 118-DC | 125-DC |
 Pin Driver |
8" | Socket: 3/8" Deep x 1-3/4" Dia. |
118-SD | 125-SD |
 Frost Wedge |
17" | 2" Wide Blade | 118-FW | 125-FW |
 Ground Rod Driver |
SOCKET DIAMETER: 11/16" | 118-GRD(A) | 125-GRD(A) | |
| 13/16" | 118-GRD(B) | 125-GRD(B) | ||
| 1" | 118-GRD(C) | 125-GRD(C) | ||
| 1-1/8" | 118-GRD(D) | 125-GRD(D) | ||
 Moil Point |
14" | LONGER LENGTHS AVAILABLE | 118P-14 | 125P-14 |
| 18" | 118P-18 | 125P-18 | ||
 Narrow Chisel |
14" | LONGER LENGTHS AVAILABLE | 118C-14 | 125C-14 |
| 18" | 118C-18 | 125C-18 | ||
 Wide Chisel |
14" | LONGER LENGTHS AVAILABLE | 118C3-14 | 125C3-14 |
| 18" | 118C3-18 | 125C3-18 | ||
 Pipe Driver |
11" | PIPE SIZE: 1" |
118-PD(A) | 125-PD(A) |
| 1-1/4" | 118-PD(B) | 125-PD(B) | ||
| 1-1/2" | 118-PD(C) | 125-PD(C) | ||
| 2" | 118-PD(D) | 125-PD(D) | ||
 Rock Buster |
13" | Taper Range: 1-1/4" to 2-1/4" Dia |
118-RB | 125-RB |
 Splitting Wedge |
17-1/2" | Drill Hole Size 2 x 12" Deep | 118-SW | 125-SW |
 Detachable Shank |
7-3/4" | FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER |
118-DS | 125-DS |
 Tamping Pad |
6" SQUARE | TPS-6 | ||
| 8" SQUARE | TPS-8 | |||
| 7" ROUND | TPR-7 | |||
 Tent Stake Driver |
2" | TSD-200 | ||
| 2-1/2" | TSD-250 | |||
 Sheathing Driver |
2" | TSH-200 | ||
| 3" | TSH-300 | |||
Brands
